PNP (positive-Negative-positive) Bipolar Junction Transistor (BJT) is mainly used for amplification and switching purposes. TO-92 metal case silicon Planar Epitaxial PNP transistor. It encompasses low leakage current, high breakdown voltage, and low capacity which makes it useful over a wide current range. I'll try to touch every aspect related to this transistor so you can get an idea of what it does and what are its main applications. Let's get started.
There are 2 P-type semiconductor materials used in these types of transistors. These elements are separated by a thin N-type semiconductor layer. The bulk of charge carriers in these transistors are holes, with electrons making up the minority.
Pin No | Pin Name |
---|---|
1 | Enitter |
2 | Base |
3 | Collector |
Max Collector Current (IC): | Max Collector-Emitter Voltage (vCE): | Max Collector-Base Voltage (vCB): | Max Emitter-Base Voltage (vEB): | Max Operating Temperature: |
---|---|---|---|---|
800mA | 40V | 60V | 5V | -65 to +150 °C |
PN2907 with the PN2907A, 2N2907, 2N5763, 2N2907A, 2N4401, 2N2905, 2N2906
The safe operating area (SOA) is defined as the regions in which a transistor can operate without self-damage or degradation. A range of a transistorʼs usability is limited by the maximum ratings such as the maximum voltage, maximum current, and maximum collector power dissipation. Transistors in high-power amplifiers or circuits driving inductive loads might be degraded or damaged even when they are used within individual maximum ratings. This is attributable to the secondary breakdown of the transistor.
Tn has 2 Role statuses: Forward Bias & Reverse Bias.
Role 1: In the status of the forward bias, the current can pass when the collector and emitter are connected.
Role 2: While in the status of the reverse bias, it acts as a disconnect switch and current cannot pass.
Transistors have a wide range of applications in electronics and other industries. Here are some common applications of transistors:
You can download this datasheet for PN2907 PNP Transistor from the link give below
A transistor is a semiconductor device that is used to amplify or switch electronic signals. It consists of three layers of doped semiconductor material and has three terminals: emitter, base, and collector.
A power transistor is a type of transistor that is designed to handle high voltage and current levels. It is used in power supply circuits, motor control circuits, and other high-power applications.
The main difference between a BJT and an FET is that a BJT controls the flow of current through the base terminal using a small current. whereas an FET controls the flow of current through a semiconductor channel using an electric field.